Tape compatibility is a range check and a process check. A 2 mm tape falls inside the 0.4–3 mm published band-thickness range on the model pages reviewed here, but panel size, tape width, material, glue and finishing stations must still be confirmed for the exact order.
Thickness is only one dimension
Tape width must cover the panel and remain inside the machine’s supported range.
For a purchase decision, translate this point into a measurable requirement: identify the material, dimensions, acceptable appearance and how the result will be inspected on a real sample.
Thicker tape changes finishing demand
Rough and fine trimming, scraping and corner geometry should be evaluated with the real tape.
For a purchase decision, translate this point into a measurable requirement: identify the material, dimensions, acceptable appearance and how the result will be inspected on a real sample.
Write the sample into the test plan
Identify the tape roll, panel and acceptable finished edge before the run-off demonstration.
For a purchase decision, translate this point into a measurable requirement: identify the material, dimensions, acceptable appearance and how the result will be inspected on a real sample.
Compatibility checklist
Include this in the enquiry or mark it for confirmation.
Include this in the enquiry or mark it for confirmation.
Include this in the enquiry or mark it for confirmation.
Include this in the enquiry or mark it for confirmation.
Include this in the enquiry or mark it for confirmation.
Include this in the enquiry or mark it for confirmation.